Display
When the sensors detect an obstacle, a graphic is shown on the multi- information display depending on the position and distance to the obsta- cle.
Optitron meter
1. Front corner sensor operation
2. Front center sensor operation
3. Front tire angle
4. Rear corner sensor operation
5. Rear center sensor operation
Accessory meter
When the vehicle is moving for- ward or backward
A simplified image is displayed when an obstacle is detected.
See also:
Initializing the system
Select “Initialize” and then “Confirm”
using the “TUNE/SEL” knob.
Select “Confirm” again using the
“TUNE/SEL” knob.
- Initialization
• The following data in the sy ...
General settings
Used for language selection and the on/off settings of operation sounds and
automatic screen change.
1. Push the “SETUP” button.
2. Touch “General”.
3. Touch the items to be set.
4 ...
Disabling the height control
When the height control OFF switch is pressed with the vehicle stopped, the vehicle
height is fixed at the current height.
This status is memorized in the sys- tem even after the engine is stoppe ...