Selecting trailer ball
Use the correct trailer ball for your application.
1. Trailer ball load rating
Matches or exceeds the gross trailer weight rating of the trailer.
2. Ball diameter
Matches the size of the trailer cou- pler. Most couplers are stamped with the required trailer ball size.
3. Shank length
Protrudes beyond the bottom of the lock washer and nut by at least 2 threads.
4. Shank diameter
Matches the ball mount hole diam- eter size.
See also:
Driving procedures
Driving the vehicle
The following procedures should be observed to ensure safe driving.
Driving
1. With the brake pedal depressed, shift the shift lever to D.
2. Release the parking brake.
3. Gra ...
If the engine will not start
If the engine will not start even though correct starting procedures are being
followed , consider each of the following points:
One of the following may be the cause of the problem:
• There may ...
Initial screen
When the “ENGINE START STOP” switch is in ACCESSORY or IGNITION ON mode, the
initial screen will be displayed and the system will begin operating.
CAUTION
When the vehicle is stopped with th ...