Selecting a portable player to be used

using a voice com- mand or the “TUNE/SEL” knob.Select “Connect Audio Player (Connect)” using a voice com- mand or the “TUNE/SEL” knob.

Pattern A

used by either of the following methods, and select “Confirm” by using a voice command Select the portable player to be used by either of the following methods, and select “Confirm” by using a voice command or the “TUNE/SEL” knob:

a. Press the talk switch and say the name of the desired portable player.

b. Press the talk switch and say “List Audio Players”. When the name of the desired portable player is read aloud, press the talk switch.

Pattern B

used using the “TUNE/SEL” knob. Select the portable player to be used using the “TUNE/SEL” knob.

Pattern A

Car” or “From Audio player”, and select “Confirm” by using a voice command or the Press the talk switch and say “From Car” or “From Audio player”, and select “Confirm” by using a voice command or the “TUNE/ SEL” knob.

Pattern B

using the “TUNE/SEL” knob.Select “From Car” or “From Audio”, using the “TUNE/SEL” knob.

If “From Car” is selected, the portable player will be automatically con- nected whenever the “ENGINE START STOP” switch is in either ACCESSORY or IGNITION ON mode.

    See also:

    Display
    When the sensors detect an obstacle, a graphic is shown on the multi- information display depending on the position and distance to the obsta- cle. Optitron meter 1. Front corner sensor operatio ...

    Switching the screens
    Any one of the screen configurations can be selected. 1. Touch this button to display the following screen. 2. To select the desired screen configuration, touch one of the following buttons. ...

    Initialization
    Items to initialize The following items must be initialized for normal system operation in cases such as after the battery is reconnected, or maintenance is performed on the vehicle. ...