Displaying the Bluetooth® device address and name
Select “Device Name” using the “TUNE/SEL”
knob.
Turn the “TUNE/SEL” knob to display
the Bluetooth® device address and name.
Select “Go Back” using the “TUNE/SEL”
knob to return to “Sys- tem Setup”.
See also:
Initializing the system
Select “Initialize” and then “Confirm”
using the “TUNE/SEL” knob.
Select “Confirm” again using the
“TUNE/SEL” knob.
- Initialization
• The following data in the sy ...
Locking the driver’s door from the outside without a key
Move the inside lock button to the
lock position.
Close the door.
The door cannot be locked if the “ENGINE START STOP” switch is in ACCESSORY or
IGNITION ON mode, or the electronic key is ...
Connecting trailer lights
Use the wire harness stored in the rear end under the vehicle body.
Please consult your dealer when installing trailer lights, as incorrect installation
may cause damage to the vehicle’s lights ...