Power outlet (12 V DC)
The power outlet can be used for 12 V accessories that run on less than 10 A.
Center cluster
Slide the auxiliary box lid.
- The power outlet can be used when
The “ENGINE START STOP” switch is in ACCESSORY or IGNITION ON mode.
NOTICE
- To avoid damaging the power outlet
Close the power outlet lid when the power outlet is not in use.
Foreign objects or liquids that enter the power outlet may cause a short circuit.
- To prevent blown fuse
Do not use an accessory that uses more than 12 V 10 A.
- To prevent battery discharge
Do not use the power outlet longer than necessary when the engine is not running.
See also:
Setting up the display
Setting up the information display
To set up the display, press the “DISP” switch until the desired item appears.
If left idle for approximately 10 seconds, the display will revert to the previo ...
Quick reference (“Setup” screen)
The items shown on the “Setup” screen can be set. To display the “Setup” screen,
push the “SETUP” button.
1. “General”
Settings are available for language selection, operation so ...
Vehicle customization
Vehicle settings can be changed.
1. Push the “SETUP” button.
2. Touch “Vehicle” on the “Setup” screen.
3. Touch “Vehicle Customization”.
4. Select the setting to be changed.
V ...