Operating HomeLink®
Press the appropriate HomeLink® button. The HomeLink® indicator light should come on.
The HomeLink® compatible transceiver in your vehicle continues to send a signal for up to 20 seconds as long as the button is pressed.
See also:
Wide view front & side monitor
Wide view front & side monitor
This system can display the wide view front monitor and the side monitor separately
or at the same time.
The wide view front monitor uses a super− wide ang ...
Tire Pressure Warning Reset Switch
This switch can initialize the tire pressure warning system
Press and hold the switch when you change the
tire inflation pressure.
For details, see the “Owner’s Manual”. ...
Initial screen
1 When the “ENGINE START STOP”
switch is in ACCESSORY or IGNI-
TION ON mode, the initial screen will
be displayed and the system will begin
operating.
• Images shown on the initial screen ...