Screen scroll operation

When any point on the map is touched, that point moves to the center of the screen and is shown by the cursor mark ( ). ).

Use the scroll feature to move the desired point to the center of the screen

Use the scroll feature to move the desired point to the center of the screen for looking at a point on the map that is different from the current position of the vehicle.

If the finger is continuously held on the screen, the map will continue scrolling in that direction until the finger is removed.

A street name, city name, etc. of the touched point will be shown, depending on the scale of the map ( from the current position to will also ). Distance from the current position to be shown (  ).will also be shown ( After the screen is scrolled, the map remains centered at the selected location ).

After the screen is scrolled, the map remains centered at the selected location until another function is activated. The current vehicle position mark will continue to move along your actual route and may move off the screen. When the “MAP/ VOICE” button is pushed, the current vehicle position mark returns to the center of the screen and the map moves as the vehicle proceeds along the designated route.

INFORMATION

When the scroll feature is used, the current vehicle position mark may disappear from the screen. Move the map with a scroll again or push the “MAP/VOICE” button to return to the current vehicle position map location display.

To set the cursor position as a destination

A specific point on the map can be set as a destination using the scroll function.

Touch “Enter  ”.

Touch “Enter The screen changes and displays the map location of the selected destination ”.

The screen changes and displays the map location of the selected destination and the route preference. (See “Starting route guidance” on page 83.)

To register the cursor position as an address book entry

Address book entry registration enables easy access to a specific point.

Touch “Mark”.

Touch “Mark”.

When you touch “Mark”, the following screen appears for a few seconds, and then the map screen returns.

The registered point is shown by

The registered point is shown by on the map. on the map.

To change the icon or name, etc., see “(b) Editing address book entries” on page 118.

Up to 100 address book entries can be registered.

If there is an attempt to register more than 100 address book entries, an error message will appear.

To see information about the icon where the cursor is set

To see information about the icon where the cursor is set

To display information about an icon, set the cursor on it.

To display information about an icon, set the cursor on it.

POI INFORMATION

When the cursor is set on a POI icon, the name and “Info.” are displayed at the top of the screen.

Touch “Info.”.

Touch “Info.”.

Information such as the name, address, and phone number are displayed.

Information such as the name, address, and phone number are displayed.

If “Enter of the cursor is set as a destination. ” is touched, the position of the cursor is set as a destination.

If there is already a set destination, “Go to “Go to  ”: To delete the existing” and “Add to Route” are displayed.

“Go to destinations and set a new one. ”: To delete the existing destinations and set a new one.

“Add to Route”: To add a destination.

To register this POI as an address book entry, touch “Mark”.

If number can be called.is touched, the registered telephone number can be called.

INFORMATION

The desired Point of Interest can be displayed on the map screen.

ADDRESS BOOK ENTRY INFORMATION

When the cursor is set on an address book entry icon, the name and “Info.” are displayed at the top of the screen.

Touch “Info.”.

Touch “Info.”.

Information such as the name, address, and phone number are displayed.

Information such as the name, address, and phone number are displayed.

If “Enter of the cursor is set as a destination. ” is touched, the position of the cursor is set as a destination.

If there is already a set destination, “Go to “Go to  ”: To delete the existing ” and “Add to Route” are displayed.

“Go to destinations and set a new one. ”: To delete the existing destinations and set a new one.

“Add to Route”: To add a destination.

To edit an address book entry, touch “Edit”. To delete an address book entry, touch “Delete”.

If number can be called. is touched, the registered telephone number can be called.

DESTINATION INFORMATION

When the cursor is set on a destination icon, the name and “Info.” are displayed on the top of the screen.

Touch “Info.”.

Touch “Info.”.

Information such as the name, address, and phone number are displayed.

Information such as the name, address, and phone number are displayed.

To delete a destination, touch “Delete”.

If number can be called. is touched, the registered telephone number can be called.

XM NavTraffic TEXT INFORMATION

When you touch the XM NavTraffic icon on the map, the XM NavTraffic info. bar will appear on the upper part of the screen.

Touch “Info.”.

Touch “Info.”.

Traffic information is displayed on the screen.

Traffic information is displayed on the screen.

Touch “Detail” to display detailed traffic event information.

Switching the screens

    See also:

    Introduction
    This manual explains the operation of the Navigation System. Please read this manual carefully to ensure proper use. Keep this manual in your vehicle at all times. The Navigation System is one of ...

    PCS (Pre-Collision System)
    When the radar sensor detects that a frontal collision is highly likely or even unavoidable, safety systems such as the brakes and seat belts are automatically engaged to lessen impact as well as ...

    Folding down the third seats
    1. R: Right seat return switch 2. R: Right seat fold switch 3.L: Left seat return switch 4.L: Left seat fold switch The switches can be operated from both the rear door side and the back door si ...