Cigarette lighters
Push the front part of the lid to open, and push the ciga- rette lighter down.
The cigarette lighter will pop up when it is ready for use.
- The cigarette lighter can be used when
The “ENGINE START STOP” switch is in ACCESSORY or IGNITION
ON mode.
CAUTION
- To avoid burns or fires
l Do not touch the metal parts of the cigarette lighter.
l Do not hold the cigarette lighter down. It could overheat and cause a fire.
l Do not insert anything other than the cigarette lighter into the outlet.
See also:
Electronic key battery
Replace the battery with a new one if it is depleted.
- You will need the following items:
• Flathead screwdriver
• Small Phillips-head screwdriver
• Lithium battery (CR1632)
- ...
Bluetooth® audio system setup
- System setup items and operation procedures
Pattern A
To enter the menu for each function, follow the steps below using a voice command
or the “TUNE/SEL” knob:
Pattern B
Press the ...
Automatic High Beam
The Automatic High Beam uses an in-vehicle camera sensor to assess the brightness
of streetlights, the lights of oncoming and preceding vehicles, etc., and automatically
turns high beam on or off ...