Four-wheel Drive System
Use these switches to select following transfer and center differential modes.
►Four-wheel drive control switch
To select “L4” mode, push down and shift the switch backward. To select “H4” mode, shift the switch forward.
1 “H4”: Normal driving
2 “L4”: Driving requiring maximum power and
traction
►Center differential lock/unlock switch
Use this switch when your vehicle’s wheels get stuck in a ditch or when you are driving on a slippy or bumpy surface.
See also:
Overview button and guidance screen
*: Press and hold the “PWR·VOL” knob for 3 seconds or more to turn off the
screen and restart the
navigation system. Do this when the vehicle-mounted device response is extremely
slow. ...
“Setup” screen
The items shown on the “Setup” screen can be set. Press the “SETUP” button to
display
the “Setup” screen.
*: Bluetooth is a registered trademark of Bluetooth SIG, Inc. ...
Disabling pre-collision braking
1.Pre-collision braking disabled
2.Pre-collision braking enabled
The “PCS” warning light turns on when pre-collision braking is dis- abled. ...