Outside rear view mirrors
Mirror angle can be adjusted using the switch.
To select a mirror to adjust, press the switch.
1. Left
2. Right


To adjust the mirror, press the switch.
1. Up
2. Right
3. Down
4. Left
Folding the mirrors
Manual type
Push the mirror back in the direc- tion of the vehicle’s rear.

Auto type

1. Extends the mirrors
2. Folds the mirrors
Mirror angle can be adjusted when
The “ENGINE START STOP” switch is in ACCESSORY or IGNITION ON mode.
When the mirrors are fogged up
Turn on the mirror heaters to defog the mirrors.
Linked mirror function when reversing
The outside rear view mirrors will automatically angle downwards when the vehicle is reversing in order to give a better view of the ground. However, this function will not operate when the mirror select switch is in the neutral position (between “L” and “R”).
Automatic adjustment of the mirror angle
A desired mirror face angle can be entered to memory and recalled automatically by the driving position memory.
Auto anti-glare function (if equipped)
When the anti-glare inside rear view mirror is set to automatic mode, the outside rear view mirrors will activate in conjunction with the anti-glare inside rear view mir- ror to reduce reflected light.
CAUTION
When driving the vehicle
Observe the following precautions while driving.
Failing to do so may result in loss of control of the vehicle and cause an accident, resulting in death or serious injury.
• Do not adjust the mirrors while driving.
• Do not drive with the mirrors folded.
• Both the driver and passenger side mirrors must be extended and properly adjusted before driving.
When a mirror is moving
To avoid personal injury and mirror malfunction, be careful not to get your hand caught by the moving mirror.
When the mirror defoggers are operating
Do not touch the rear view mirror surfaces, as they can become very hot and burn you.
NOTICE
If ice should jam the mirror
Do not operate the control or scrape the mirror face. Use a spray de-icer to free the mirror.
See also:
Event data recorder
This vehicle is equipped with an event data recorder (EDR). The main purpose
of an EDR is to record, in certain crash or near crash-like situations, such as
an air bag deployment or hitting a road ...
Changing the display
Switches between odometer and trip meter displays. When the trip meter is displayed,
pressing and holding the button will reset the trip meter.
...
Safety Connect
Safety Connect is a subscription-based telematics service that uses Global
Positioning
System (GPS) data and embedded cellular technology to provide safety and
security
features to subscribers. ...
