Turning on the high beam headlights
1.With the headlights on, push the lever away from you to turn on the high beams.
When the light switch is in “AUTO” position, the Automatic High Beam system will be activated.
Pull the lever toward you to the center position to turn the high beams off.
2.Pull the lever toward you and release it to flash the high beams once.
You can flash the high beams with the headlights on or off.
See also:
Crawl Control
Allows travel on extremely rough off-road surfaces at a fixed low speed without
pressing the accelerator or brake pedal. Minimizes loss of traction or vehicle slip
when driving on slippery road su ...
Navigation settings
“Home” and “Preset Destinations” can be set and edited.
Points or areas on the map can be registered.
On this screen, the following operations can be performed.
...
Operating the system using voice commands
By following voice guidance instructions output from the speaker, voice commands
enable to the operation of the hands-free phone system with- out the need to check
the display or operate the “TU ...