Emergency flashers
Use the emergency flashers if the vehicle malfunctions or is involved in an accident.
Press the switch to flash all the turn signal lights. To turn them off, push the switch once again.
NOTICE
- To prevent battery discharge
Do not leave the emergency flashers on longer than necessary when the engine is not running.
See also:
Quick reference (“Setup” screen)
The items shown on the “Setup” screen can be set. To display the “Setup” screen,
push the “SETUP” button.
1. “General”
Settings are available for language selection, operation so ...
Setting speed dials
Select “Set Speed Dial (Speed Dial)”
using a voice command or the “TUNE/SEL” knob.
Pattern A
Select the data to be registered
as a speed dial by either of the following methods, and se ...
Loading a CD
Press the “LOAD” button.
“WAIT” is shown on the display.
When the indicator on the slot turns
from amber to green, insert a CD.
The display changes from “WAIT” to “LOAD”.
...