Multi-information display

Settings that can be changed using the menu switch and the “ENTER” switch.

 - In the following situations, customize mode will automatically be

 - In the following situations, customize mode will automatically be turned off.

• A warning message appears after the customize mode screen is displayed.

• The “ENGINE START STOP” switch is turned to OFF.

• The vehicle begins to move while the customize mode screen is displayed.

CAUTION

 - Cautions during customization

As the engine needs to be running during customization, ensure that the vehicle is parked in a place with adequate ventilation. In a closed area such as a garage, exhaust gases including harmful carbon monoxide (CO) may collect and enter the vehicle. This may lead to death or a serious health hazard.

NOTICE

 - During customization

To prevent battery discharge, ensure that the engine is running while customizing features.

    See also:

    Safety information for Safety Connect
    Important! Read this information before using Safety Connect.  - Exposure to radio frequency signals The Safety Connect system installed in your vehicle is a low-power radio transmitter and r ...

    Checking and replacing fuses
    If any of the electrical components do not operate, a fuse may have blown. If this happens, check and replace the fuses as necessary. Turn the “ENGINE START STOP” switch OFF. The fuses are lo ...

    Display
    When the sensors detect an obstacle, a graphic is shown on the multi- information display depending on the position and distance to the obsta- cle. Optitron meter 1. Front corner sensor operatio ...