Screen adjustment

You can adjust the contrast, brightness, color and tone of the screen. You can also turn the display off, and change the screen to either day or night mode.

Contrast, brightness, color and tone adjustment

The contrast, brightness, color and tone of the screen can be adjusted depending on the brightness of your surroundings. You can also turn the display off.

1. Push the “DISP” button.

1. Push the “DISP” button.

Contrast and brightness adjustment

Contrast and brightness adjustment

2. Touch the desired button to adjust contrast and brightness.

“Contrast” “+”: Strengthens the contrast of the screen.

“Contrast” “–”: Weakens the contrast of the screen.

“Brightness” “+”: Brightens the screen.

“Brightness” “–”: Darkens the screen.

3. After adjusting the screen, touch “OK”.

If your vehicle is equipped with the rear seat entertainment system, the rear screen turns on or off when “Rear” is touched.

The screen goes off when “Screen Off” is touched. To turn the display screen back on, push the “DISP” button again.

INFORMATION

When you do not touch any button on the “Display” screen for 20 seconds, the previous screen will be displayed.

Color and tone adjustment

Color and tone adjustment

1. Touch the desired button to adjust color and tone.

You can adjust the color and the tone while the DVD video, DVD audio and video CD are being played.

“Color” “R”: Strengthens the red color of the screen.

“Color” “G”: Strengthens the green color of the screen.

“Tone” “+”: Strengthens the tone of the screen.

“Tone” “–”: Weakens the tone of the screen.

2. After adjusting the screen touch “OK”.

If your vehicle is equipped with the rear seat entertainment system, the rear screen turns on or off when “Rear” is touched.

The screen goes off when “Screen Off” is touched. To turn the display screen back on, push the “DISP” button again.

INFORMATION

When you do not touch any button on the “Display” screen for 20 seconds, the previous screen will be displayed.

Changing between day mode and night mode

Depending on the position of the headlight switch, the screen changes to day mode or night mode.

To display the screen in day mode even with the headlight switch on, touch

To display the screen in day mode even with the headlight switch on, touch “Day Mode” on the adjustment screen for brightness and contrast control.

If the screen is set in day mode with the headlight switch turned on, this condition is memorized in the system even with the engine is turned off.

In the following conditions, the displays condition is not changed to night mode even if headlight switch is turned on.

The instrument panel light control switch is adjusted full brightness.

The vehicle is in a bright area such as daytime.

    See also:

    Adjusting the position of and opening and closing the air outlets
    Front center outlets 1. Direct air flow to the left or right, up or down 2. Turn the knob to open or close the vent Front side outlets 1. Direct air flow to the left or right, up or down 2. T ...

    Replacement parts
    Warranty coverage is not dependent upon the use of any particular brand of replacement parts. However, Lexus recommends using only Genuine Lexus Parts when you need to replace a part on your vehi ...

    Armrest
    Fold down the armrest for use. NOTICE  - To prevent damage to the armrest Do not apply too much load on the armrest. ...