Current position display
When starting the navigation system, the current position is displayed first.
This screen displays the current vehicle position and a map of the surrounding local area.
The current vehicle position mark (
) appears in the center or bottom
center of the map screen.
A street name will appear on the bottom of the screen, depending on the scale
of the map ( 
).
You can return to this map screen that shows your current position at any time from any screen by pushing the “MAP/ VOICE” button.
While driving, the current vehicle position mark is fixed on the screen and the map moves.
The current position is automatically set as the vehicle receives signals from the GPS (Global Positioning System). If the current position is not correct, it is automatically corrected after the vehicle receives signals from the GPS.
INFORMATION
After the battery disconnection, or on a new vehicle, the current position may not be correct. As soon as the system receives signals from the GPS, the correct current position is displayed.
To correct the current position manually, see page 346.
See also:
Child restraint systems
A child restraint system for a small child or baby must itself be properly
restrained on the seat with the lap portion of the lap/shoulder belt.
The laws of all 50 states of the U.S.A. and Canada n ...
Setting speed dials
Select “Set Speed Dial (Speed Dial)”
using a voice command or the “TUNE/SEL” knob.
Pattern A
Select the data to be registered
as a speed dial by either of the following methods, and se ...
PCS (Pre-Collision System)
When the radar sensor detects that a frontal collision is highly likely or
even unavoidable, safety systems such as the brakes and seat belts are automatically
engaged to lessen impact as well as ...