Destination search by Home
1. Push the “DEST” button.
2. Touch “Go Home”.
The screen changes and displays the map location for home and the route preference.
(See “Starting route guidance” on page 83.) If home has not been registered, a message will be displayed and the setting screen will automatically appear.
To use this function, it is necessary to set a “Home” address. (To register “Home”, see page 111.)
INFORMATION
Guidance starts from the current vehicle position to your home if “OK” is touched even while driving.
See also:
Setting up the display
Setting up the information display
To set up the display, press the “DISP” switch until the desired item appears.
If left idle for approximately 10 seconds, the display will revert to the previo ...
If the electronic key does not operate properly
If communication between the electronic key and vehicle is interrupted or
the electronic key cannot be used because the battery is depleted, the smart access
system with push-button start and wire ...
Intuitive parking assist
The distance from your vehicle to nearby obstacles when parallel parking or
maneuvering into a garage is measured by the sensors and communicated via the multi-information
display and a buzzer. Al ...