Setting home as the destination

1. Push the “DEST” button.

2. Touch “Go Home”.
“Go Home” can be used if your home has been registered. (To register “Home”, see “(a) Registering home” on page 111.)

3.Touch “Go to
”.

4. Touch “OK”, and start driving.
Routes other than the one recommended can also be selected. (See “Starting route guidance” on page 83.)
5. Guidance to the destination is given via voice and on the guidance screen.
See also:
Screen adjustment
The contrast and brightness of the
screen display and the image the cam-
era displays can be adjusted. The display
can also be turned off, and/or changed
to either day or night mode.
SCREEN SETTI ...
Changing other settings
Setting the display mode
Pushing “SIZE” changes the display modes sequentially as follows:
Normal “Wide 1” “Wide 2”
Adjusting the screen
Push “DISPLAY”.
Select the desired b ...
Wide view front & side monitor
Wide view front & side monitor
This system can display the wide view front monitor and the side monitor separately
or at the same time.
The wide view front monitor uses a super− wide ang ...
