Moving a second seat for third seat access (with third seats)
Getting in the vehicle (right side only)
Pull the seatback angle adjustment lever and fold down the seatback.
The seat will slide forward.
Move the seat to the front-most position

Getting out of the vehicle
Pull the release lever and fold down the seatback. The seat will slide forward.
Move the seat to the front-most position
Make sure that no passenger is seated on the second seat before pulling the release lever.

After passengers have entered/exited the vehicle
Lift up the seatback and slide the seat backward until it locks.
See also:
Selecting conventional constant speed control mode
Constant speed control mode differs from vehicle-to-vehicle distance control
mode. When constant speed control mode is selected, your vehi- cle will maintain
a set speed regardless of whether or n ...
Operating the system using voice commands
By following voice guidance instructions output from the speaker, voice commands
enable to the operation of the Bluetooth® audio system with- out the need to check
the display or operate the “T ...
Safety Connect LED light Indicators
When the “ENGINE START STOP” switch is turned to IGNITION ON mode, the red indicator
light comes on for 2 seconds then turns off.
Afterward, the green indicator light comes on, indicating that ...
