Emergency flashers
The emergency flashers are used to warn other drivers when the vehicle has to be stopped in the road due to a breakdown, etc.
Press the switch.
All the turn signal lights will flash.
To turn them off, press the switch once again.
- Emergency flashers
If the emergency flashers are used for a long time while the engine is not
operating, the battery may discharge.
See also:
Adjusting sound quality and volume balance
- Changing sound quality modes
Press the “TUNE/SEL” knob.
Pressing the button changes sound modes in the following order:
“BAS” → “MID” → “TRE” → “FAD” & ...
Power outlets
The power outlet can be used for the following components:
12 V: Accessories that run on less than 10 A
120 V AC: Accessories that use less than 100 W
►Front (12 V)
►Rear (12V)
&# ...
Adjusting the sensitivity of the air intake control in automatic mode (vehicles
with a rear automatic air conditioning system)
Press for 2 or more seconds.
Press “” (increase) or “”
(decrease) on the temperature control button on the driver’s side.
From - 3 (low) to 3 (high) can be set.
...