Multi-information Display
The multi-information display shows information about your vehicle, including the items shown below
■Display information
● Trip information
• Average vehicle speed>
• Driving distance>
• Driving range>
• Average fuel consumption>
• Current fuel consumption>
● Outside temperature>
● Speedometer>
● Turn-by-turn navigation>
● Front tire angle>
● Intuitive parking assist display (if equipped)>
● Dynamic radar cruise control settings
(if equipped)>
● 4-Wheel AHC display>
● Multi-terrain Select display>
● Crawl Control display>
● Shift position and shift range>
● Tire inflation pressure>
● Warning messages
■Changing the display
Trip information items can be switched by pressing the “DISP” switch.
■ When using the intuitive parking assist or dynamic radar cruise control,
the appropriate
display is shown on the screen.
■ If a problem is detected in any of the vehicle’s systems, a warning message is
shown on the
multi-information display.
See also:
Checking and replacing fuses
If any of the electrical components do not operate, a fuse may have blown.
If this happens, check and replace the fuses as necessary.
Turn the “ENGINE START STOP” switch
off.
Open the fuse ...
Destination search by “Previous Destinations”
1. Push the “DEST” button.
2. Touch “Previous Destinations” on the “Destination” screen.
The previous starting point and up to 100 previously set destinations are displayed
on the sc ...
Lubrication system
*: The engine oil capacity is a reference quantity to be used when exchanging.
Warm up and turn off the engine, wait more than 5 minutes, and check the oil
level on the dipstick.
- Engine ...