Dynamic Radar Cruise Control
Dynamic radar cruise control supplements conventional cruise control with a vehicle-tovehicle distance control mode.
1 Display
2 Set speed
3 Indicators
4 Vehicle-to-vehicle distance button
5 Cruise control switch
■Cruise control display
Cruise control settings are shown on the multiinformation display.
1 Vehicle ahead indicator
2 Vehicle-to-vehicle distance
3 Set speed
■Vehicle-to-vehicle distance control mode
1 Press the “ON-OFF” button.
2 Accelerate or decelerate to the desired speed, and then push the lever down.
Following distance can be adjusted using the vehicle-to-vehicle distance control switch.
■Adjusting the set speed
To increase speed: push the lever up.
To decrease speed: push the lever down.
Release the lever when the desired speed is reached.
■Canceling and resuming the speed control
1 To temporarily cancel the dynamic radar cruise control, pull the lever toward you. To resume the cruise control, push the lever up.
2 To turn the system off, press the “ON-OFF” button.
■Constant speed control mode
1 Press the “ON-OFF” button.
2 Push the lever forward and hold for approximately one second.
3 Accelerate or decelerate to the desired speed, and then push the lever down.
The vehicle-to-vehicle distance control mode maintains the preset cruising speed as long as no vehicle is detected ahead.
See also:
Maintenance requirements
To ensure safe and economical driving, day-to-day care and regular
maintenance is essential. It is the owner’s responsibility to perform
regular checks. Lexus recommends the following maintenance. ...
Replacement parts
Warranty coverage is not dependent
upon the use of any particular brand
of replacement parts. However, Lexus
recommends using only Genuine
Lexus Parts when you need to replace
a part on your vehi ...
Console box
Console box (if equipped)
Your vehicle is equipped with either a console box or cool box.
For vehicles with the cool box, refer to page 691.
Lift the lid while pulling up the
lower lever to re ...