Instrument cluster light control switch
The brightness of the instrument cluster lights can be adjusted.
1. Brighter
2. Darker
The meters and display illuminate when
The “ENGINE START STOP” switch is in IGNITION ON mode.
Instrument cluster brightness adjustment
The instrument cluster brightness levels when the tail lights are on and off can be adjusted.
The brightness of the instrument cluster lights
When the tail lights are on, the brightness will change. However, when the sur- roundings are bright (daytime, etc.) turning on the tail lights will not change the instrument cluster brightness.
In addition, the brightness of the instrument cluster lights is automatically adjusted based on the light sensor detecting how bright the surroundings are.
When disconnecting and reconnecting battery terminals
The trip meter data will be reset.
If the trip meter was displayed last, the ODO screen will be displayed after reset- ting.
Customization
Setting of sensitivity of the ambient light sensor used for dimming the meter lights can be changed.
NOTICE
To prevent damage to the engine and its components
• Do not let the indicator needle of the tachometer enter the red zone, which indi- cates the maximum engine speed.
• The engine may be overheating if the engine coolant temperature gauge is in the red zone (H). In this case, immediately stop the vehicle in a safe place, and check the engine after it has cooled completely.
See also:
Safety Connect services
- Automatic Collision Notification
In case of either airbag deployment or severe rear-end collision, the system
is designed to automatically call the response center. The responding agent rec ...
Replacing the Key
Your Lexus dealer can generate replacement keys. Certain bonded/ registered locksmiths
may also be able to generate replacement keys.
When ordering a new key, bring all keys for the vehicle to your ...
Operating HomeLink®
Press the appropriate HomeLink® button. The HomeLink® indicator light should
come on.
The HomeLink® compatible transceiver in your vehicle continues to send a signal
for up to 20 seconds as lo ...