Setting up the display

Setting up the information display

To set up the display, press the “DISP” switch until the desired item appears.

If left idle for approximately 10 seconds, the display will revert to the previous screen.

Setting the contrast

Press the display adjustment switch (“∧” or “∨”) to adjust the contrast.

Press the display adjustment switch (“∧” or “∨”) to adjust the contrast.

+: Strengthen

-: Weaken

Setting the brightness

Press the display adjustment switch (“∧” or “∨”) to adjust the brightness.

Press the display adjustment switch (“∧” or “∨”) to adjust the brightness.

+: Brighter

-: Darker

Setting the day mode

Press the display adjustment switch (“∧” or “∨”) to select ON or OFF.

Press the display adjustment switch (“∧” or “∨”) to select ON or OFF.

Setting up the display of the monitors

Press the display adjustment switch (“∧” or “∨”) to adjust the contrast.

Press the display adjustment switch (“∧” or “∨”) to adjust the contrast.

+: Strengthen

-: Weaken

Setting the brightness

Press the display adjustment switch (“∧” or “∨”) to adjust the brightness.

Press the display adjustment switch (“∧” or “∨”) to adjust the brightness.

+: Brighter

-: Darker

Liquid crystal display

Small spots or light spots may appear on the display. This phenomenon is character- istic of liquid crystal displays, and there is no problem continuing to use the display.

Outside temperature display

In the following situations, the correct outside temperature may not be displayed, or the display may take longer than normal to change.

• When stopped, or driving at low speeds (less than 12 mph [20 km/h])

• When the outside temperature has changed suddenly (at the entrance/exit of a garage, tunnel, etc.)

When “--” or “E” is displayed on the outside temperature display

The system may be malfunctioning. Take your vehicle to your Lexus dealer.

When disconnecting and reconnecting battery terminals

The following information data and settings will be reset:

• Average fuel consumption after refueling

• Average fuel consumption

• Average vehicle speed

• Elapsed time

Customization

Setting of available languages can be changed.

NOTICE

The multi-information display at low temperatures

Allow the interior of the vehicle to warm up before using the liquid crystal informa- tion display. At extremely low temperatures, the information display monitor may respond slowly, and display changes may be delayed.

    See also:

    Stop the vehicle immediately.
    A buzzer sounds and a warning message is shown on the multi-informa- tion display. The following warning indicates the possibility of damage to the vehicle that may lead to an accident. Immediatel ...

    Using the hands-free phone system (for mobile phones)
    Hands-free system for mobile phones The hands-free system is a function that allows you to use your mobile phone without touching it. This system supports Bluetooth® mobile phones. Bluetooth® is ...

    Determining Your Maintenance Interval: Months vs. Mileage
    Lexus recommends obtaining scheduled maintenance for your vehicle every six months or 5,000 miles, whichever occurs first. For example: • If at six months you have driven less than 5,000 miles, ...