Wide view front & side monitor
This system can display the wide view front monitor and the side monitor.
The wide view front monitor uses a super-wide angle lens to display on screen the areas to the left and right of the vehicle and the blind spots to the front of the vehicle. This system helps the driver check for approaching cars, bicycles and pedestrians when at intersections with poor visibility.
The side monitor uses a camera installed in the passenger’s side outside rear view mirror to display on screen the area to the right of the vehicle, helping the driver check this area.
Vehicles with a navigation system
Refer to the “Navigation System Owner’s Manual”.
Vehicles without a navigation system
On/off
The camera image is displayed when the wide view front & side monitor switch is pressed.
Changing the display
The screen changes as follows with each press of the wide view front & side monitor switch.
The wide view front monitor display and trip information are not accessi- ble when the shift lever is in R.
On vehicles with Multi-terrain Select, the Multi-terrain Monitor can be switched to by pressing the wide view front & side monitor switch while the system is operating.
See also:
Map database information and updates
This system uses the maps of DENSO.
2012 DENSO CORPORATION
2010 NAVTEQ. All rights reserved.
2010 Tele Atlas North America, Inc.
All rights reserved. This material is proprietary and the subject o ...
Roll Sensing of Curtain Shield Airbags Off Switch
This switch can turn off the curtain shield airbags and front seat belt
pretensioners in a vehicle
rollover.
ON/OFF
Press and hold until indicator light turns on/off. ...
Safety Connect services
- Automatic Collision Notification
In case of either airbag deployment or severe rear-end collision, the system
is designed to automatically call the response center. The responding agent rec ...