Selecting and scanning a folder
- Selecting folders one at a time
Press the 6 (
) or 5 (
)
button to select the desired folder.
- Returning to the first folder
Press and hold the 5 (
) button until
you hear a beep.
- Scanning the first file of all the folders
Press and hold the “SCAN” button
until you hear a beep.
The first ten seconds of the first file in each folder will be played.
When the desired folder is reached,
press the “SCAN” button again.
See also:
Locking the driver’s door from the outside without a key
Move the inside lock button to the
lock position.
Close the door.
The door cannot be locked if the “ENGINE START STOP” switch is in ACCESSORY or
IGNITION ON mode, or the electronic key is ...
Noise from under vehicle after turning off the engine
Approximately five hours after the engine is turned off, you may hear sound coming
from under the vehicle for several minutes. This is the sound of a fuel evaporation
leakage check and, it does no ...
Setting voice guidance volume
Select “Guidance Vol” using the
“TUNE/SEL” knob.
Change the voice guidance volume.
To decrease the volume: Turn the “TUNE/SEL” knob counterclockwise.
To increase the volume: Turn th ...