Floor mat
Use only floor mats designed specifically for vehicles of the same model and model year as your vehicle. Fix them securely in place onto the carpet.
Fix the floor mat in place using the retaining hooks (clips) pro- vided.
The shape of the retaining hooks (clips) and the fixing procedure of the floor mat for your vehicle may differ from those shown in the illustration. For details, refer to the floor mat retention clip installation instructions supplied with the clips.
CAUTION
Observe the following precautions.
Failure to do so may cause the driver’s floor mat to slip, possibly interfering with the pedals while driving. An unexpectedly high speed may result or it may become diffi- cult to stop the vehicle, leading to a serious accident.
- When installing the driver’s floor mat
• Do not use floor mats designed for other models or different model year vehicles, even if they are Lexus Genuine floor mats.
• Only use floor mats designed for the driver’s seat.
• Always install the floor mat securely using the retaining hooks (clips) provided.
• Do not use two or more floor mats on top of each other.
• Do not place the floor mat bottom-side up or upside-down.
CAUTION
- Before driving
• Check that the floor mat is securely fixed in the correct place with all the provided retaining hooks (clips). Be especially care- ful to perform this check after cleaning the floor.
• With the engine stopped and the shift lever in P, fully depress each pedal to the floor to make sure it does not interfere with the floor mat.
See also:
By geographic region
In the United States, U.S.
Territories and Canada
To obtain warranty service in the
United States, U.S. territories or
Canada, take your vehicle to an
authorized Lexus dealership. If your
vehi ...
Detour setting
While the route guidance is operating, you can change the route to detour around
a section of the route where a delay is caused by road repairs, or an accident,
etc.
1. Touch “Route”.
2. ...
Installing child restraints
Follow the child restraint system manufacturer’s instructions. Firmly
secure the child restraints to the outboard second seats using the
LATCH anchors or a seat belt. Attach the top tether strap w ...