See also:

Reprogramming a HomeLink® button
Press and hold the desired HomeLink® button. After 20 seconds, the HomeLink® indicator light will start flashing slowly. Keep pressing the HomeLink® button and then follow the “Programming Ho ...

Disabling pre-collision braking
1.Pre-collision braking disabled 2.Pre-collision braking enabled The “PCS” warning light turns on when pre-collision braking is dis- abled. ...

Initializing the system
Select “Initialize” and then “Confirm” using the “TUNE/SEL” knob. Select “Confirm” again using the “TUNE/SEL” knob.  - Initialization • The following data in the sy ...