Distance and time to destination
When the vehicle is on the guidance route, the distance and the estimated travel/arrival time to the destination are displayed.
When the vehicle is not on the guidance route, the distance and the direction of the destination are displayed.
When driving on the guidance route and more than one destination is set, the distance and the estimated travel/arrival time from the current position to each destination are displayed.
1. Touch this button to display the following screen.
2. Touch the number button to display the desired destination.
The distance, the estimated travel time and the estimated arrival time from the current position to the selected destination are displayed.
Estimated travel time is displayed.
Estimated arrival time is displayed.
To switch to estimated arrival
time.
To switch to estimated travel
time.
Displayed while driving off the
guidance route. The destination direction is indicated by an arrow.
INFORMATION
When the vehicle is on the guidance route, the distance measured along the route is displayed. Travel time and arrival time is calculated based on the set vehicle speed information.
However, when the vehicle is not on the guidance route, the distance is the linear distance between the current position and the destination.
See also:
Positions for towing hitch receiver and hitch ball
1. Weight carrying ball position:
50.5 in. (1282.9 mm)
2. Hitch receiver pin hole position:
44.1 in. (1120.4 mm) ...
Tire information
Typical tire symbols
1. Tire size
2. DOT and Tire Identification Number (TIN)
3. Location of treadwear indicators
4. Tire ply composition and materials
Plies are layers of rubber-coated paralle ...
Destination search by “Coordinates”
1. Push the “DEST” button.
2. Touch “Coordinates” on the second page of the “Destination” screen.
3. Input the latitude and the longitude.
4. When the input is finished, touch “OK ...