Using the video mode
Push “VIDEO” to select the video mode.
Before switching to the video mode, connect the audio−video equipment to the A/V input port.
When “Speaker Output” is off, any audio− video source can be selected for the other rear display. See “ Changing the speaker output” on page 268.
Using the port
Push and release the lid.
The A/V input port is composed of 3 input ports.
Yellow: Image input port
White: Left channel audio input port
Red: Right channel audio input port
The rear seat entertainment system plays videos and sound when audio−video equipment is connected to the A/V input port. For details, refer to the manufacturer’s instructions.
NOTICE
When the A/V input port is not in use, keep the A/V input port cover closed.
Inserting anything other than an appropriate plug may cause electrical failure or a short circuit.
If the video is not correctly displayed
Push “DISPLAY”.
Select “PAL VIDEO”.
If the video is not correctly displayed, turn “PAL VIDEO” on or off.
See also:
Body Repairs
If you’re involved in a collision, you
want your vehicle to be returned to
its pre-accident condition when
repaired. That’s why it is important to
make sure repairs are made only with
Genuine ...
Deleting previous destinations
The previous destination can be deleted.
1. Push the “SETUP” button.
2. Touch “Navi.” on the “Setup” screen.
3. Touch “Delete Previous Dest.”.
4. Touch the button you want to d ...
Using a Bluetooth® phone
1 Device name
2 Bluetooth® connection sta-
tus
3 Character deletion
4 Make a call
To display the screen shown above, press
or
on the
steering wheel.
Registering a Bluetooth® phone
You ...