Anti-glare inside rear view mirror
In automatic mode, sensors are used to detect the headlights of vehicles behind and automatically reduce the reflected light.
1 Turns automatic mode on
2 Turns automatic mode off
The indicator comes on when auto mode is turned on.
The mirror will revert to the auto mode each time the “ENGINE START STOP” switch is turned to IGNI-
Adjusting the height of the rear view mirror
Adjust the height of the rear view mirror by moving it up and down.
- To prevent sensor error
To ensure that the sensors operate properly, do not touch or cover them.
CAUTION
- While driving
Do not adjust the position of the mirror.
Doing so may lead to mishandling of the vehicle and an accident, resulting in death or serious injury.
See also:
Distance and time to destination
When the vehicle is on the guidance
route, the distance and the estimated
travel/arrival time to the destination are
displayed. When the vehicle is not on the
guidance route, the distance and dire ...
“Setup” screen
The items shown on the “Setup” screen can be set. Press the “SETUP” button to
display
the “Setup” screen.
*: Bluetooth is a registered trademark of Bluetooth SIG, Inc. ...
Changing other settings
Setting the display mode
Pushing “SIZE” changes the display modes sequentially as follows:
Normal “Wide 1” “Wide 2”
Adjusting the screen
Push “DISPLAY”.
Select the desired b ...