Alarm
The system sounds the alarm and flashes lights when forcible entry is detected.
- Triggering of the alarm
The alarm is triggered in the following situations when the
alarm is set:
l A locked door is unlocked or opened in any way other than
by using the entry function or the wireless remote control.
(The doors will lock again automatically.)
l The hood is opened.
l The battery is reconnected.
- Setting the alarm system
Close the doors and hood, and lock all doors.
The system will be set automatically after 30 seconds.
The indicator light changes from being on to flashing when the system is set.
- Deactivating or stopping the alarm
Do one of the following to deactivate or stop the alarm.
l Unlock the doors.
l Turn the “ENGINE START STOP” switch to ACCESSORY
or IGNITION ON mode, or start the engine. (The
alarm will be deactivated or stopped after a few seconds.)
- System maintenance
The vehicle has a maintenance-free type alarm system.
- Items to check before locking the vehicle
To prevent unexpected triggering of the alarm and vehicle theft, make sure
of the following.
l Nobody is in the vehicle.
l The windows and moon roof are closed before the alarm is set.
l No valuables or other personal items are left in the vehicle.
- Triggering of the alarm
The alarm may be triggered in the following situations. (Stopping the alarm
deactivates the alarm system.)
l A person inside the vehicle opens a door or hood.
l The battery is reconnected.
- When the battery is disconnected
Be sure to cancel the alarm system.
If the battery is disconnected before canceling the alarm, the system may be triggered when the battery is reconnected.
- Alarm-operated door lock
l When the alarm is operating, the doors are locked automatically to prevent
intruders.
l Do not leave the key inside the vehicle when the alarm is operating, and
make sure the key is not inside the vehicle when recharging or replacing
the battery.
- Panic mode
When is pressed for longer than about one second, the head lights/tail lights/emergency flashers will flash, the front and rear interior lights will come on, and an alarm will sound for about 60 seconds to deter any person from trying to break into or damage your vehicle.
To stop the alarm, press any button on the wireless remote control.
NOTICE
- To ensure the system operates correctly
Do not modify or remove the system. If modified or removed, the proper
operation of the system cannot be guaranteed.
See also:
Parking brake
To set the parking brake, fully depress the parking brake pedal with your left
foot while depressing the brake pedal with your right foot.
(Depressing the pedal again releases the parking brake.) ...
Have the vehicle inspected by your Lexus dealer immediately.
A buzzer sounds and a warning message is shown on the multi-informa- tion display.
Failure to investigate the cause of the following warnings may lead to the system
operating abnormally and possib ...
Multi-informatiodisplay
The multi-information display presents the driver with a variety of
driving-related data including the current outside air temperature.
l Trip information
Displays driving range, fuel consumption ...