Correct driving posture

Drive with a good posture as follows:

1 Sit upright and well back

1 Sit upright and well back in the seat.
2 Adjust the position of the seat forward or backward to ensure the pedals can be reached and easily depressed to the extent required.
3 Adjust the seatback so that the controls are easily operable.
4 Adjust the tilt and tele- scopic positions of the steering wheel downward so the airbag is facing your chest.
5 Lock the head restraint in place with the center of the head restraint closest to the top of your ears.
6 Wear the seat belt cor-

CAUTION

- While driving
l Do not adjust the position of the driver’s seat while driving.
Doing so could cause the driver to lose control of the vehicle.

l Do not place a cushion between the driver or passenger and the seatback.
A cushion may prevent correct posture from being achieved, and reduce the effectiveness of the seat belt and head restraint, increasing the risk of death or serious injury to the driver or passenger.

l Do not place anything under the front seats.
Objects placed under the front seats may become jammed in the seat tracks and stop the seat from locking in place. This may lead to an acci- dent. The adjustment mechanism may also be damaged.

l Do not recline the seat more than necessary when the vehicle is in motion, to reduce the risk of sliding under the lap belt.
If the seat is too reclined during an accident, the lap belt may slide past the hips and apply restraint forces directly to the abdomen or your neck may contact the shoulder belt, increasing the risk of death or serious injury.

- Adjusting the seat position
l Take care when adjusting the seat position to ensure that other passengers are not injured by the moving seat.
l Do not put your hands under the seat or near the moving parts to avoid injury.

Fingers or hands may become jammed in the seat mechanism.

    See also:

    General information
    You are responsible for ensuring that your Lexus is operated and maintained according to the instructions in the Owner’s Manual and the “Maintenance Information” section of this guide. Y ...

    Crawl Control (with Turn Assist function)
    Crawl Control allows travel on extremely rough off-road surfaces at a fixed low speed without pressing the accelerator or brake pedal. To select a speed mode, shift the Crawl Control switch for ...

    Disabling pre-collision braking
    1.Pre-collision braking disabled 2.Pre-collision braking enabled The “PCS” warning light turns on when pre-collision braking is dis- abled. ...