Installation with LATCH system

Fold the seatback forward. Then return the seatback and secure it at the first lock position (most upright position).

Type A

Type A

Flip the cover (vehicles with third seats), and latch the hooks of lower straps

Flip the cover (vehicles with third seats), and latch the hooks of lower straps onto the LATCH anchors. If the child restraint has a top tether strap, the top tether strap should be latched onto the top tether strap anchor. For owners in Canada:

The symbol on a child restraint sys- tem indicates the presence of a lower anchorage system.

Type B

Flip the cover (vehicles with third seats), and latch the buckles onto the LATCH

Flip the cover (vehicles with third seats), and latch the buckles onto the LATCH anchors. If the child restraint has a top tether strap, the top tether strap should be latched onto the top tether strap anchor.

For owners in Canada:

The symbol on a child restraint sys- tem indicates the presence of a lower anchorage system.

    See also:

    Ashtrays
    ►Front Push the front part of the lid to open. Push the lid again to close. To remove, pull the ashtray upwards. ►Rear Pull the ashtray lid to open. To remove, pull the ash ...

    Engine oil
    With the engine at operating temperature and turned off, check the oil level on the dipstick.  - Checking the engine oil Park the vehicle on level ground. After warming up the engine and t ...

    Electronic key battery
    Replace the battery with a new one if it is discharged. - You will need the following items: l Flathead screwdriver (To prevent damage to the key, cover the tip of the screwdriver with rag.) l S ...