Selecting and scanning a folder
- Selecting folders one at a time
Press the 6 (
) or 5 (
)
button to select the desired folder.
- Returning to the first folder
Press and hold the 5 (
) button until
you hear a beep.
- Scanning the first file of all the folders
Press and hold the “SCAN” button
until you hear a beep.
The first ten seconds of the first file in each folder will be played.
When the desired folder is reached,
press the “SCAN” button again.
See also:
Wheels
If a wheel is bent, cracked or heavily corroded, it should be replaced.
Otherwise, the tire may separate from the wheel or cause loss of han-
dling control.
- Wheel selection
When replacing wh ...
Regulations on the use of tire chains
Regulations regarding the use of tire chains vary depending on location and type
of road. Always check local regulations before installing chains.
Tire chain installation
Observe the following pre ...
Setting route
DETOUR SETTING
While the route guidance is operating,
the route can be changed to detour
around a section of the route where a
delay is caused by road repairs, or an ac-
cident, etc.
1 Touch “ ...