Operating the system using voice commands

By following voice guidance instructions output from the speaker, voice commands enable to the operation of the Bluetooth® audio system with- out the need to check the display or operate the “TUNE/SEL” knob.

 - Operation procedure when using voice commands

Press the talk switch and follow voice guidance instructions.

 - Auxiliary commands when using voice commands

The following auxiliary commands can be used when operating the system using a voice command:

“Cancel”: Exits the Bluetooth® audio system

“Repeat”: Repeats the previous voice guidance instruction

“Go back”: Returns to the previous procedure

“Help”: Reads aloud the function summary if a help comment is regis- tered for the selected function

    See also:

    Emergency flashers
    The emergency flashers are used to warn other drivers when the vehicle has to be stopped in the road due to a breakdown, etc. Press the switch. All the turn signal lights will flash. To tur ...

    Engine compartment cover
     - Removing the engine compartment cover  - Installing the clips NOTICE  - After installing an engine compartment cover Make sure the cover is securely installed in its original ...

    Display
    When the sensors detect an obstacle, a graphic is shown on the multi- information display depending on the position and distance to the obsta- cle. Optitron meter 1. Front corner sensor operatio ...