Installing tire pressure warning valves and transmitters
When replacing tires or wheels, tire pressure warning valves and trans- mitters must also be installed.
When new tire pressure warning valves and transmitters are installed, new ID codes must be registered in the tire pressure warning computer and the tire pressure warning system must be initialized. Have tire pres- sure warning valve and transmitter ID codes registered by your Lexus dealer.
See also:
General maintenance
Listed below are the general maintenance items that should be performed at
the intervals specified in the “Warranty and Service Guide” or “Owner’s Manual Supplement”.
It is recommended t ...
Steps to take in an emergency
If a warning light turns on or a warning buzzer sounds...
Calmly perform the following actions if any of the warning lights comes on
or flashes. If a light comes on or flashes, but then goes off, th ...
Connecting and disconnecting a trailer
Stop your vehicle and a trailer in line and perform the following:
• Connecting a trailer
Set the rear height control air
suspension to N mode.
Turn off the “ENGINE START STOP”
switch o ...