See also:

Connecting and disconnecting a trailer
Stop your vehicle and a trailer in line and perform the following: • Connecting a trailer Set the rear height control air suspension to N mode. Turn off the “ENGINE START STOP” switch o ...

Capacity and distribution
Cargo capacity depends on the total weight of the occupants. (Cargo capacity) = (Total load capacity) — (Total weight of occupants) Steps for Determining Correct Load Limit — 1. Locate the stat ...

Removing the luggage cover
The luggage cover can be removed by following the procedure below. Retract the cover and release both ends, then lift it out. Vehicles without third seats: After removing the luggage cover, place it ...