See also:

Setting up the display
Setting up the information display To set up the display, press the “DISP” switch until the desired item appears. If left idle for approximately 10 seconds, the display will revert to the previo ...

Approach warning
When your vehicle is too close to a vehicle ahead, and sufficient auto- matic deceleration via the cruise control is not possible, the display will flash and the buzzer will sound to alert the dri ...

If the vehicle battery is discharged
If you have a set of jumper (or booster) cables and a second vehicle with a 12 volt battery, you can jump start your Lexus by following the steps below. Open the hood. Connecting the jumper cab ...