Registering home

1. Push the “DEST” button.

1. Push the “DEST” button.

2. Touch “Go Home”.

2. Touch “Go Home”.

If home has not been registered, you can register it by touching “Go Home”.

3.Touch “Yes”.

3.Touch “Yes”.

4. There are 4 different methods to search your home.

4. There are 4 different methods to search your home.

See “Destination search” on page 62.

5. Touch “Enter”.

5. Touch “Enter”.

The “Edit Home” screen is displayed.

6. Touch “OK”.

6. Touch “OK”.

Registration of home is complete.

You can also register home by pushing the “SETUP” button. (See “(a) Registering home” on page 111.) You can change the name, location, phone number and icon. (See “(b) Editing home” on page 112.)

    See also:

    Erasing the entire HomeLink® memory (all three programs)
    Press and hold the 2 outside but- tons for 10 seconds until the indi- cator light flashes. If you sell your vehicle, be sure to erase the programs stored in the HomeLink® memory.  - Befo ...

    Rear air conditioning system
    Airflow and outlets are automatically adjusted according to the tem- perature setting. Using the automatic mode Press the “AUTO” button. The air conditioning system will begin to operate. ...

    Wide View Front & Side Monitor
    This system can display the wide view front monitor and the side monitor separately or at the same time. This system helps the driver check for front and side of the vehicle. ON/OFF The displ ...