Opening, closing and locking the doors
See also:
Setting up the display
Setting up the information display
To set up the display, press the “DISP” switch until the desired item appears.
If left idle for approximately 10 seconds, the display will revert to the previo ...
Approach warning
When your vehicle is too close to a vehicle ahead, and sufficient auto- matic
deceleration via the cruise control is not possible, the display will flash and
the buzzer will sound to alert the dri ...
Adjusting the sensitivity of the air intake control in automatic mode (vehicles
with a rear automatic air conditioning system)
Press for 2 or more seconds.
Press “” (increase) or “”
(decrease) on the temperature control button on the driver’s side.
From - 3 (low) to 3 (high) can be set.
...
