Power Windows
1 Window lock switch
The window lock switch disables the operation
of all windows other than the driver’s
door window.
2 Power window switches
To open: press the switch.
To close: pull the switch up.
Fully pulling up and releasing the switches causes the windows to close fully. Fully pressing down and releasing the switches causes the windows to open fully.
See also:
Replacing a flat tire
Chock the tires.
Pry off the wheel ornament, using the beveled end of the wheel orna- ment remover
as shown.
Slightly loosen the wheel nuts (one turn).
Assembling the jack handle.
Remove ...
Initializing the system
Select “Initialize” and then “Confirm”
using the “TUNE/SEL” knob.
Select “Confirm” again using the
“TUNE/SEL” knob.
- Initialization
• The following data in the sy ...
Hood
Release the lock from the inside of the vehicle to open the hood.
Pull the hood release lever.
The hood will pop up
slightly.
Lift the hood catch and lift
the hood.
CAUTION
- Pre-driving ...
