See also:

Setting up the display
Setting up the information display To set up the display, press the “DISP” switch until the desired item appears. If left idle for approximately 10 seconds, the display will revert to the previo ...

If a warning light turns on or a warning buzzer sounds...
Calmly perform the following actions if any of the warning lights turn on or flash. If a light turns on or flashes, but then turns off, this does not necessarily indicate a malfunction in the syst ...

Extending the case
Push the lock release button. Pull the case until it locks. Check that the lock release button can be seen.  - Adjusting the sub cover (vehicles with third seats) Fasten the button when t ...