When driving
- Driving procedures
- Instrument cluster
- Operating the lights and windshield wipers
- Using other driving systems
- Driving information
See also:
Checking and replacing fuses
If any of the electrical components do not operate, a fuse may have
blown. If this happens, check and replace the fuses as necessary.
Turn the “ENGINE START STOP�
switch OFF.
The fuses are lo ...
If a warning light turns oor a warning buzzer sounds
Calmly perform the following actions if any of the warning lights turn
on or flash. If a light turns on or flashes, but then turns off, this does
not necessarily indicate a malfunction in the system ...
Safety information for Safety Connect
Important! Read this information before using Safety Connect.
- Exposure to radio frequency signals
The Safety Connect system installed in your vehicle is a low-power radio transmitter
and r ...
