Connecting trailer lights
Use the wire harness stored in the rear end under the vehicle body.
Please consult your dealer when installing trailer lights, as incorrect installation may cause damage to the vehicle’s lights. Please take care to comply with your state’s laws when installing trailer lights.
See also:
Connecting and disconnecting a trailer
Stop your vehicle and a trailer in line and perform the following:
• Connecting a trailer
Set the rear height control air
suspension to N mode.
Turn off the “ENGINE START STOP”
switch o ...
Follow the correction procedures.
A buzzer sounds and a warning message is shown on the multi-informa- tion display.
After taking the specified steps to correct the suspected problem, check that the
warning message goes off.
...
Turning on the high beam headlights
1.With the headlights on, push the lever away from you to turn on the high beams.
When the light switch is in “AUTO” position, the Automatic High Beam system will
be activated.
Pull the leve ...