Starting the engine

in P and depress the brake pedal. Ensure that the shift lever is in P and depress the brake pedal.

Touch the Lexus emblem side of the electronic key to the “ENGINE START STOP”

Touch the Lexus emblem side of the electronic key to the “ENGINE START STOP” switch.

If any of the doors is opened or closed while the key is being touched to the switch, an alarm will sound to indicate that the start function cannot detect the elec- tronic key.

within 10 seconds of the buzzer sounding, keeping the brake pedal depressed.Press the “ENGINE START STOP” switch within 10 seconds of the buzzer sounding, keeping the brake pedal depressed.

In the event that the “ENGINE START STOP” switch still cannot be oper- ated, contact your Lexus dealer.

 - Stopping the engine

Shift the shift lever to P and press the “ENGINE START STOP” switch as you nor- mally do when stopping the engine.

 - Replacing the key battery

As the above procedure is a temporary measure, it is recommended that the elec- tronic key battery be replaced immediately when the battery is depleted.

 - Changing “ENGINE START STOP” switch modes

Within 10 seconds of the buzzer sounding, release the brake pedal and press the “ENGINE START STOP” switch.

The engine does not start and modes will be changed each time the switch is pressed.

    See also:

    Range covered by each camera
    1. Front monitor 2. Side-front simultaneous display monitor 3. Side-rear simultaneous display monitor 4. Rear monitor The illustration shown here is an example. As such, the actual visible area ...

    Disabling pre-collision braking
    1.Pre-collision braking disabled 2.Pre-collision braking enabled The “PCS” warning light turns on when pre-collision braking is dis- abled. ...

    If a warning light turns on or a warning buzzer sounds...
    Calmly perform the following actions if any of the warning lights turn on or flash. If a light turns on or flashes, but then turns off, this does not necessarily indicate a malfunction in the syst ...