If the electronic key does not operate properly
If communication between the electronic key and vehicle is interrupted or the electronic key cannot be used because the battery is depleted, the smart access system with push-button start and wireless remote control cannot be used. In such cases, the doors can be opened or the engine can be started by following the procedure below.
See also:
Erasing the entire HomeLink® memory (all three programs)
Press and hold the 2 outside but- tons for 10 seconds until the indi- cator light
flashes.
If you sell your vehicle, be sure to erase the programs stored in the HomeLink®
memory.
- Befo ...
CD changer operation
(a) Inserting discs
The “ENGINE START STOP” switch must be in ACCESSORY or IGNITION ON mode.
Your CD changer can store up to 6 discs.
You can set a disc at the lowest empty disc number.
Settin ...
Wireless remote control
The wireless remote control can be used to lock and unlock the vehicle.
1. Locks all the doors
2. Unlocks all the doors
Pressing the button unlocks the driver’s door. Pressing the but- ton again ...