Selecting, fast-forwarding, reversing and scanning tracks
- Selecting a track
Press “” to move up or “
”
to move down using the “SEEK•TRACK” button until the desired track number is displayed.
- Fast-forwarding and reversing tracks
To fast-forward or reverse, press and hold “”
or “
” on the “SEEK•TRACK” button until
you hear a beep.
- Scanning tracks
Press the “SCAN” button.
The first ten seconds of each track will be played.
To cancel, press the “SCAN” button again.
Press the button again when the
desired track is reached.
See also:
Initial screen
When the “ENGINE START STOP” switch is in ACCESSORY or IGNITION ON mode, the
initial screen will be displayed and the system will begin operating.
CAUTION
When the vehicle is stopped with th ...
Fuel information
Your vehicle must use only unleaded gasoline.
Premium unleaded gasoline with an octane rating of 91 (Research
Octane Number 96) or higher required for optimum engine perfor-
mance. If 91 octane c ...
Route overview
1. Touch “Route”.
2. Touch “Overview”.
The entire route from the current position to the destination is displayed.
“OK”: To start guidance.
“Turn List”: The following screen ...