See also:

Checking and replacing fuses
If any of the electrical components do not operate, a fuse may have blown. If this happens, check and replace the fuses as necessary. Turn the “ENGINE START STOP” switch off. Open the fuse ...

Setting up the display
Setting up the information display To set up the display, press the “DISP” switch until the desired item appears. If left idle for approximately 10 seconds, the display will revert to the previo ...

Display POI* icons
Points of Interest such as gas stations and restaurants can be displayed on the map screen. You can also set their location as a destination and use them for route guidance. 1. Touch “Show on ...