See also:

Erasing the entire HomeLink® memory (all three programs)
Press and hold the 2 outside but- tons for 10 seconds until the indi- cator light flashes. If you sell your vehicle, be sure to erase the programs stored in the HomeLink® memory.  - Befo ...

Engine (ignition) switch
Performing the following operations when carrying the electronic key on your person starts the engine or changes “ENGINE START STOP” switch modes. Starting the engine Check that the parking b ...

Selecting vehicle height
Operating the switch changes vehicle rear height as follows: 1. Higher 2. Lower Vehicle height can be adjusted only when the engine is running. The selected height mode will be shown on the rear ...