Garage door opener
The garage door opener can be programmed to operate garage doors, gates, entry doors, door locks, home lighting systems, and security systems, and other devices.
The garage door opener (HomeLink® Universal Transceiver) is manufactured under license from HomeLink®.
- Programming HomeLink® (for U.S. owners)
- Operating HomeLink®
- Reprogramming a HomeLink® button
- Erasing the entire HomeLink® memory (all three programs)
See also:
Erasing the entire HomeLink® memory (all three programs)
Press and hold the 2 outside but- tons for 10 seconds until the indi- cator light
flashes.
If you sell your vehicle, be sure to erase the programs stored in the HomeLink®
memory.
- Befo ...
Enter a Bluetooth phone
To use the hands−free system, you need to enter your phone into the system.
Once you have registered it, you can make a hands−free call.
If you haven’t yet registered any Bluetooth pho ...
Checking and replacing fuses
If any of the electrical components do not operate, a fuse may have blown.
If this happens, check and replace the fuses as necessary.
Turn the “ENGINE START STOP” switch
off.
Open the fuse ...